The anion gap, explained
What the gap measures, how to calculate and correct it, and what a high, normal or low gap tells you, with charts you can move.
The anion gap is sodium minus chloride and bicarbonate: Na+ − (Cl− + HCO3−). It estimates the negative ions a routine chemistry panel doesn't measure. A typical normal gap is about 8 to 12 mEq/L.1 When bicarbonate is low, a high gap means an acid has been added, as in ketoacidosis, lactic acidosis, kidney failure or a poisoning, and a normal gap means bicarbonate has been lost, most often through diarrhea or the kidneys.1
- Anion gap
- 12 mEq/L
- Corrected for albumin
- 12.0
- Delta ratio
- —
Normal anion gap. The measured ions balance as expected and bicarbonate is not low: no sign of a metabolic acidosis.
What is the anion gap?
Blood carries exactly as much positive charge as negative charge. A basic metabolic panel, though, reports only some of the ions that carry it. On the positive side sodium dominates, and on the negative side chloride and bicarbonate do. Add up a normal panel and the sides don't match: sodium is about 140, while chloride and bicarbonate together come to about 128.
The 12 or so that's missing isn't missing from the blood. It's negative charge carried by ions the panel leaves out: mostly albumin, plus phosphate, sulfate and organic anions such as lactate, offset a little by unmeasured cations like calcium, magnesium and potassium.2 That leftover is the anion gap.
So the gap is a window onto things you didn't measure. When an unmeasured acid builds up in the blood, the gap grows, and that's what makes it useful.
Anion gap formula
Anion gap = Na+ − (Cl− + HCO3−)
All three values come from the same basic metabolic panel, in mEq/L. (For these single-charge ions, mEq/L and mmol/L are the same number.) On many panels bicarbonate is reported as total CO2.
A worked example with normal values:
140 − (104 + 24) = 12 mEq/L
Some labs add potassium to sodium: (Na+ + K+) − (Cl− + HCO3−). That version runs about 4 higher, so its normal range is about 12 to 16.1 Use the same formula your lab's reference range was built on.
What is a normal anion gap?
About 8 to 12 mEq/L when the gap is sodium minus chloride and bicarbonate.1 Treat that as a guide rather than a fixed rule. The normal gap varies between labs, because analyzers measure the ions in different ways, and it varies between healthy people too.2 It has shifted before: when labs moved to newer ion-selective electrodes, chloride started reading higher, and one lab's normal range fell to 3 to 11 mEq/L.3
High anion gap metabolic acidosis: causes
An acid releases a hydrogen ion and leaves behind its anion. Bicarbonate buffers the hydrogen ion and is used up in the process, so bicarbonate falls. The acid's anion, such as lactate or a ketone, stays in the blood but isn't on the panel. One measured anion has been swapped for an unmeasured one, and the gap grows by about as much as bicarbonate fell.
The GOLD MARK mnemonic lists the main causes:4
- Glycols: ethylene glycol and propylene glycol
- Oxoproline, linked to long-term acetaminophen use
- L-lactate: lactic acidosis, as in shock or sepsis
- D-lactate, made by gut bacteria in short bowel syndrome
- Methanol
- Aspirin: salicylate poisoning
- Renal failure: the kidneys stop clearing acid
- Ketoacidosis: diabetic, alcoholic or starvation
StatPearls also lists rhabdomyolysis and metformin among the causes of a high gap.1
Normal anion gap (hyperchloremic) metabolic acidosis
Here bicarbonate is lost rather than used up, or the kidneys fail to make it. No new anion appears. Instead chloride rises as bicarbonate falls, the two measured anions trade places, and the gap stays where it was. That's why it's also called hyperchloremic acidosis.
The main causes:1
- Diarrhea, which carries bicarbonate out in the stool
- Renal tubular acidosis, where the kidneys can't reclaim bicarbonate or excrete acid
- Large volumes of normal saline, which brings in more chloride than plasma holds
- Less often, Addison disease and ureteral diversions or pancreatic fistulas
Correcting the anion gap for albumin
Albumin is the largest share of the unmeasured anions2, so when albumin falls the gap shrinks with it. Each 1 g/dL drop in albumin lowers the gap by about 2.5 mEq/L.5 In a patient with a low albumin, a real rise in unmeasured acid can hide inside a gap that looks normal.
Corrected gap = anion gap + 2.5 × (4.0 − albumin in g/dL)
This matters most in the critically ill: in the study that derived the correction, about half of the intensive care patients had an albumin below 2.0 g/dL.5
The delta ratio: is there a second disorder?
In a pure high anion gap acidosis, the gap rises by about as much as bicarbonate falls. The delta ratio compares the two to look for a second process hiding behind the first.
Delta ratio = (anion gap − 12) ÷ (24 − HCO3−)
12 is the top of the normal gap and 24 a normal bicarbonate. The ratio reads in three bands:1
Diabetic ketoacidosis: Na 132, Cl 96, HCO₃⁻ 10, gap 26.
| Delta ratio | What it suggests |
|---|---|
| Under 1 | Bicarbonate fell further than the gap rose: a normal-gap acidosis as well. |
| 1 to 2 | A high anion gap acidosis on its own. |
| Over 2 | Bicarbonate fell less than expected: a metabolic alkalosis as well, such as from vomiting, or a bicarbonate that was high to begin with. |
Use it as a hint, not a verdict. The ratio varies from patient to patient even in a pure high-gap acidosis, so read it alongside the history, the blood gas and the rest of the panel.2 It only applies when the gap is high and bicarbonate is low, and with a low albumin it should use the corrected gap.
What does a low anion gap mean?
A low gap is most often a lab error or a low albumin. Less often it points to a paraprotein, as in IgG multiple myeloma, or to lithium, bromide or iodide poisoning.2 A gap below zero almost always means one of the measurements is wrong.
Practice: work out the gap
Try each one before you open the answer.
Case 1. A 19-year-old with type 1 diabetes, vomiting and deep breathing. Na 132, Cl 96, HCO3 10, albumin 4.0.
Gap = 132 − (96 + 10) = 26, high. Albumin is normal, so no correction. Delta ratio = (26 − 12) ÷ (24 − 10) = 14 ÷ 14 = 1.0: a high anion gap acidosis on its own, fitting diabetic ketoacidosis.
Case 2. Three days of profuse watery diarrhea. Na 138, Cl 114, HCO3 14, albumin 4.0.
Gap = 138 − (114 + 14) = 10, normal, with a low bicarbonate and a high chloride: a normal anion gap (hyperchloremic) acidosis, fitting bicarbonate lost in the stool.
Case 3. A patient with liver cirrhosis and new confusion. Na 138, Cl 106, HCO3 20, albumin 2.0.
Gap = 138 − (106 + 20) = 12, which looks normal. Corrected for albumin: 12 + 2.5 × (4.0 − 2.0) = 17, high. The low albumin was hiding a high anion gap acidosis, so look for a cause such as lactate.
References
- Kharsa A, Vashisht R, Rout P, Meseeha M. Anion Gap and Non-Anion Gap Metabolic Acidosis. In: StatPearls. Treasure Island (FL): StatPearls Publishing; updated 2025 Aug 6. www.ncbi.nlm.nih.gov/books/NBK448090/
- Kraut JA, Madias NE. Serum anion gap: its uses and limitations in clinical medicine. Clin J Am Soc Nephrol. 2007;2(1):162-174. doi.org/10.2215/CJN.03020906
- Winter SD, Pearson JR, Gabow PA, Schultz AL, Lepoff RB. The fall of the serum anion gap. Arch Intern Med. 1990;150(2):311-313. pubmed.ncbi.nlm.nih.gov/2302006/
- Mehta AN, Emmett JB, Emmett M. GOLD MARK: an anion gap mnemonic for the 21st century. Lancet. 2008;372(9642):892. doi.org/10.1016/S0140-6736(08)61398-7
- Figge J, Jabor A, Kazda A, Fencl V. Anion gap and hypoalbuminemia. Crit Care Med. 1998;26(11):1807-1810. doi.org/10.1097/00003246-199811000-00019